100mm Isover Spacesaver Loft Insulation Roll

100mm Isover Spacesaver Loft Roll

Isover Spacesaver Loft Roll is a high-quality glass fibre mineral wool insulation. It boasts zero Ozone Depletion Potential (ODP) and zero Global Warming Potential (GWP).
There are no CFCs, HCFCs, or other harmful gases used in the production process. The product is in roll form. It is intended for use in loft floors and cold roofs as a thermal application. To make installation between joists with 400mm or 600mm centres easier, the rolls are pre-perforated at 3 x 386mm and 2 x 580mm. Isover Spacesaver Loft Roll achieves a thermal conductivity of 0.44 W/mK.

For cold roof structures in new-build, renovation and extension projects, 100mm Isover Spacesaver glass wool offers fantastic thermal insulation. Isover Spacesaver is made of lightweight, premium glass mineral wool that is simple to handle, cut and install. If necessary, a utility knife may be used to cut this product effortlessly. The Isover Spacesaver rolls resist moisture deterioration, which means they require no maintenance. The compact packaging of the rolls makes it easy to move and store them. With a correct installation, Isover Spacesaver rolls will endure as long as the building.

Why choose 100mm Loft Roll Isover Spacesaver?

Adding loft roll to a house can prevent heat loss. It does this by trapping hot air, which otherwise escapes out the roof. This will provide your property warm winters and cool summers, resulting in a more pleasant and climate-controlled atmosphere. As much as 25% of a buildings heat loss occurs through the roof on a home that does not have loft insulation. Additionally, the use of spacesaver loft roll can improve the thermal and energy efficiency of a property. Furthermore, this helps contribute to tackling climate change and global warming. This is because less energy is required to heat a home when loft insulation is correctly installed.

Isover Loft Roll is suitable for the applications below.

• Pitched Roof – Between and Over Joists
• Flat Roof – Between Joists
• Ground Floor Suspended Timber – Between Joists

How to install 100mm Isover Loft Roll

100mm Isover Loft roll should be laid down between each rafter in the loft. The cavity for the loft rollers should be 400mm or 600mm. If two rolls need to be combined, they should be closely butted together. The rolls can be cut to size when necessary.
Use a long instrument like a broom or plank of wood to make sure the rolls are firmly pressed into nooks and crevices that are difficult to reach.
The loft roll between the rafters should be covered with a second layer. This is to be applied vertically if the first layer was horizontal and vice versa. The thickness of the combined loft rolls must be at least 270mm. The insulation installation is finished after all of the rafters in the loft area are covered.
When in a loft, it is advised that you use crawl boards so you can move around securely and comfortably. Don’t forget to keep the insulation away from the heat-generating components. This includes recessed lighting fixtures as well. Non-combustible downlight protection covers should be installed to further limit fire risks.
Please be aware it is advised to hire a professional tradesmen before installing loft insulation in your home to prevent structural damage.

Isover Spacesaver Loft Roll Certifications:

• ISO 9001:2008
• BS EN13162:2012
• BS EN13172:2012
• ISO 14001:2004
• Euroclass A1 Reaction to Fire classification