Description
Recticel 130mm is a quality product made up of a 2400mm by 1200mm rigid polyisocyanurate (PIR) core with a low emissivity foil facing bonded to each side to provide high thermal quality.
130mm Recticel Eurothane GP PIR Insulation Board
- 130mm PIR Boards are an extremely popular product within the construction industry
- The insulation boards have a straight edge to ensure boards can be tightly butted together to avoid thermal bridging
- Recticel boards hold a great compression strength and are a well-used product for insulating floors
- This size is commonly used due to its thinner size, the 130mm can be installed in walls that contain a smaller cavity to make the most of the building’s space.
- PIR Insulation Boards are lightweight making them super easy to handle, cut, and install
- This board offers an incredible thermal conductivity of just 0.022W/mK – which for those who don’t know, means a very small amount of heat can pass through the board, keeping the heat inside your home or office!
- Whilst staying warm in the winter and cool in the summer, you’re also providing an energy-efficient environment that contributes to the reduction of climate change
- While you think it stops at helping the environment, with less heat escaping, Recticel PIR boards can also save you money on your energy bills
130mm Recticel Applications
130mm PIR Insulation Boards can be used in a variety of application types within domestic and commercial buildings. This includes roofs, walls, and floors. More specifically Recticel 130mm can be used for flat roofs, pitched roofs, solid masonry walls and floors as well as timber-framed & steel framed systems. Full application types can be found below:
Ground Floor – Concrete Slab
Ground Floor – Suspended Timber Joist
Ground Floor – Beam and Block
Ground Floor – Upgrading Existing Concrete Slab
External Wall – Timber Frame Internal Linings
External Wall – Timber Frame Sheathing
External Wall – Between Timber Frame Studs
External Wall – Solid Masonry Internal Linings
Pitched Roof – Over Timber Rafters
Pitched Roof – Sarking
Pitched Roof – Below Timber Rafters
Pitched Roof – Between Timber Rafters
Pitched Roof – Loft insulation – Between and Over Timber Joists
Flat Roof – Balconies & Terraces Over Joists
Flat Roof – Between Timber Joists
Flat Roof – Below Timber Joists
Safety:
- Reaction to Fire: Euroclass F according to BS EN 13501-1
- Environmental management ISO 14001:2015
- BBA Certificate 02/3905
- Achieves a BRE Green Guide A+ rating
- Quality Management Standard – ISO 9001:2015
Recticel PIR Board FAQs
How are PIR Insulation Boards installed in a pitched roof?
Install stop batten before installing insulation. Accurately cut the Recticel Eurothane GP boards to fit between the rafter timbers. Cut the boards to fit the space between each individual rafter as sizes may differ. Put the boards into the rafter cavities and position against the stop battens. The stop battens should be positioned such that the bottom face of the EUROTHANE GP board is flush with the bottom of the rafters If required.
An additional layer of EUROTHANE GP or EUROTHANE PL boards can be fixed horizontally over the rafters by means of plasterboard timber screws. The minimum distance from the screw to the edge of the board is 10mm. For horizontal or hand sawn edges a minimum distance of 15mm should be kept. The maximum distance between screws is 250mm Screw length should be calculated based on a minimum penetration of 25mm into the timber structure Screws should be tightened until the countersunk head is driven in just below the surface of the plasterboard.
How do you cut insulation boards?
The best and easiest way to cut cavity wall boards is to measure and mark the board to size and then score the insulation with a sharp knife, snap the board over a hard edge and score the other side. A fine-toothed saw can also be used to cut the boards.
What size recticel board do I need?
The size you need will depend on the space being insulated. Thicker insulation is always the best option to achieve the best thermal conductivity possible however a thinner board will also improve the thermal conductivity. This decision is really based on how much space you want to save, and if the board meets the building regulations.
Are recticel PIR boards waterproof?
Is Recticel Insulation Water Resistant? Moisture and dampness can significantly reduce the effectiveness of thermal insulation. Recticel have developed their range of boards to withstand moisture from ground level or in an attic space which is great for floor and roof insulation or areas that may experience moistuire.
FAQs
Can 130mm Recticel eurothane GP boards be used in flat roof applications ?
130mm Recticel eurothane GP boards are commonly used for flat roof applications
Will 130mm Recticel eurothane GP boards Rot over time?
No, 130mm Recticel eurothane GP boards will not rot over time when they have been installed correctly
Is 130mm Recticel Eurothane GP available in different sizes?
No,130mm it comes in a standard size of 2.4m x 1.2m, but different thicknesses are available.
Imani –
The driver was very careful handling the Recticel Eurothane GP PIR during delivery to ensure no damages
Olivia –
Do they sell these in bigger sizes maybe 3000mm?
Tyler –
Delivery was decent, no fuss.
Dylan –
This product has made my life so much easier
Kamille M –
Really easy to order and had my delivery within 3 days